Skip to main content

arcleaning-sealing.co.uk

British-Roof-Cleaning

Blog

A freshly cleaned, resanded and sealed block paved driveway is a great sight. The colour is rich, the joints are firm and the surface sheds rain and dirt with ease. But no sealer lasts forever. Car tyres, weather and everyday use slowly wear it away, and at some point every sealed driveway needs resealing.

The question we hear most often from homeowners across Hertfordshire, Bedfordshire, Buckinghamshire and North London is simple: when? Reseal too early and you spend money you did not need to. Leave it too late and the joints start to fail, weeds return and the blocks lose their colour.

In this guide we explain how long block paving and its sealer last, the signs that tell you it is time to reseal, what affects the lifespan, and how to keep your driveway protected between treatments.

The Quick Answer

Most block paving sealers last somewhere between three and five years, although this varies with the product, how much traffic the driveway takes and how much shade it gets. The best time to reseal is when water no longer beads on the surface, joint sand starts to loosen or wash out, weeds or moss return in the joints, or the colour starts to fade. Resealing should be done in dry, settled weather, after a thorough clean, biocide treatment and resanding where needed.

How Long Does Block Paving Last?

It helps to separate the blocks from the sealer.

Element

Typical lifespan

Notes

Concrete block paving

Often decades when well laid

The blocks themselves are very hard wearing

Clay block paving

Often decades when well laid

Colour is very stable

Kiln dried joint sand

Can wash out within a few years if unsealed

Sealing locks it in place

Block paving sealer

Usually around 3 to 5 years

Depends on product, traffic, shade and weather

In other words, the blocks will usually outlast many cycles of sealing. Regular resealing is what keeps them looking good and protects the joints that hold the whole driveway together.

What Sealing Does for Block Paving

A quality joint stabilising sealer soaks into the blocks and the kiln dried sand between them. As it cures, it binds the sand grains together and protects the surface of the blocks. This:

  • Locks the joint sand in place so it is not washed or swept away
  • Makes it much harder for weeds and moss to root in the joints
  • Discourages ants from digging out the sand
  • Reduces staining from oil, tyre marks and organic debris
  • Protects and enhances the colour of the blocks

Our driveway sealing page explains how the joints are protected in more detail.

Eight Signs Your Block Paving Needs Resealing

1. Water no longer beads on the surface

Pour a little water onto the driveway. On a well sealed surface it beads up or sits on top before slowly drying. If it soaks straight in and darkens the blocks, the sealer has worn away.

2. Joint sand is loose or washing out

Run your fingers along the joints. If the sand feels loose, gritty or is visibly lower than the top of the blocks, the sealer is no longer binding it.

3. Weeds and moss are returning in the joints

Fresh green shoots between the blocks are often the first visible sign that the joints have lost their protection.

4. Ant activity has started again

Small piles of sand on the surface mean ants are digging into the joints, which is much harder for them when the sand is properly sealed.

5. The colour has faded

Sealers help protect the colour of the blocks. When the driveway starts to look pale, dull or patchy, the protection is wearing thin.

6. Stains are soaking in more easily

If oil drips, leaf stains and tyre marks are becoming harder to clean, the surface is absorbing more than it should.

7. Wear patterns are appearing

The areas where cars turn and park usually wear first. If these areas look different from the rest of the driveway, they may need attention before the whole surface does.

8. It has been three to five years since the last seal

Even if your driveway still looks fine, it is worth having it checked once the sealer reaches this age.

What Affects How Long Your Sealer Lasts?

Factor

Effect on sealer lifespan

Heavy vehicle traffic and turning

Wears the sealer faster, especially in tyre tracks

Shade and nearby trees

Damp conditions and leaf litter encourage growth and staining

Product quality

Professional sealers usually outlast cheaper alternatives

Preparation before sealing

Poor cleaning or damp joints shorten the life of any sealer

Pressure washing between treatments

Strips sealer and loosens joint sand

Weather exposure

Frost, heavy rain and strong sun all add to wear

How We Reseal Block Paving at A&R

  1. Survey. We check the condition of the blocks, the joints and the existing sealer, and look for sunken or broken blocks that need repair first.
  2. Deep clean. Our driveway cleaning service uses professional rotary surface cleaners to remove dirt, moss, weeds and old, contaminated joint sand.
  3. Biocide treatment. A professional biocide is applied to kill remaining spores and roots in the joints.
  4. Drying. The driveway must be completely dry before resanding and sealing. We plan this around the weather.
  5. Resanding. Kiln dried sand is brushed deep into every joint so they are fully packed.
  6. Sealing. A quality joint stabilising sealer is applied evenly through our driveway sealing service. We work with Smartseal products, which are designed for this job.
  7. Curing. We tell you how long to keep cars and foot traffic off the driveway, which depends on the product and the weather.

Our block paving packages bring these steps together. Bronze covers cleaning and biocide treatment, Silver adds resanding, and Gold includes cleaning, biocide, resanding and sealing. Compare them on our packages page.

When Is the Best Time of Year to Reseal?

Late spring, summer and early autumn are usually the best times to reseal block paving in the UK. The driveway needs to be completely dry, and the sealer needs settled weather and suitable temperatures to cure properly. Cleaning can be carried out in cooler months, but sealing is often best planned for a dry spell.

How to Make Your Sealer Last Longer

  • Sweep regularly. Removing leaves, soil and grit stops debris building up in the joints.
  • Avoid pressure washing close to the surface. A gentle rinse or a professional maintenance clean is far kinder to the sealer and joints.
  • Deal with spills quickly. Oil and fuel left on the surface can soften some sealers and leave stains.
  • Pull small weeds early. Remove any seedlings before their roots spread.
  • Trim back overhanging plants. Less shade and leaf litter means less moss and staining.
  • Book a light clean and biocide in between. A maintenance treatment can help stretch the time before a full reseal is needed.

Can I Reseal Block Paving Myself?

It is possible, but the results depend on preparation. The driveway must be thoroughly cleaned, treated with biocide, fully dried and properly resanded before any sealer goes on, and the sealer must be applied evenly in the right weather. Mistakes often lead to a patchy, cloudy or peeling finish, or sealer that fails within a year. A professional reseal costs more upfront but usually lasts longer and looks better.

Frequently Asked Questions

How often should block paving be resealed?

Most driveways need resealing every three to five years, depending on traffic, shade and the sealer used. Checking the surface with a simple water test helps you judge when it is due.

Can you seal block paving straight after cleaning?

No. The driveway must be fully dry first, and the joints need to be resanded. Sealing damp blocks or sand can lead to a cloudy finish and poor bonding.

Will resealing stop weeds completely?

Resealing greatly reduces weed growth by locking the joint sand, but seeds can still land on the surface. Regular sweeping keeps the odd weed to a minimum.

Do I need to resand before resealing?

Usually, yes. Cleaning removes some of the old joint sand, and fresh kiln dried sand gives the sealer a full, firm joint to bind.

How long before I can drive on a resealed driveway?

Vehicles usually need to stay off while the sealer cures, typically a day or two depending on the product and the weather. We will give you clear guidance on the day.

Does resealing change the colour of the blocks?

Most sealers enhance the colour slightly, bringing back some of the richness the blocks had when new. We will talk you through the finish options before we start.

Keep Your Driveway Protected

Block paving can last for decades, but only if the joints and surface are protected. Resealing at the right time keeps weeds out, locks the sand in place and keeps your driveway looking its best.

Alan, Russell and the A&R team clean, resand and reseal block paving across Luton, Dunstable, St Albans, Harpenden, Watford, Hemel Hempstead, Milton Keynes, Leighton Buzzard, Bedford and the surrounding areas. Call 01582 757304 or request a free quote today. Finance is also available if you would like to spread the cost.

Call Now